State-of-the-Art of High-Power Gyro-Devices and Free Electron Masers
 

From The DNP-NMR Blog:

State-of-the-Art of High-Power Gyro-Devices and Free Electron Masers

Everything you ever wanted to know about gyrotrons, their applications and their design is summarized in this article. With a whooping 1528 references this article will be the encyclopedia of gyrotrons for many years to come.




Thumm, Manfred. “State-of-the-Art of High-Power Gyro-Devices and Free Electron Masers.” Journal of Infrared, Millimeter, and Terahertz Waves, January 3, 2020.


https://doi.org/10.1007/s10762-019-00631-y.


This paper presents a review of the experimental achievements related to the development of high-power gyrotron oscillators for long-pulse or CWoperation and pulsed gyrotrons for many applications. In addition, this work gives a short overview on the present development status of frequency step-tunable and multi-frequency gyrotrons, coaxialcavity multi-megawatt gyrotrons, gyrotrons for technological and spectroscopy applications, relativistic gyrotrons, large orbit gyrotrons (LOGs), quasi-optical gyrotrons, fastand slow-wave cyclotron autoresonance masers (CARMs), gyroklystrons, gyro-TWT amplifiers, gyrotwystron amplifiers, gyro-BWOs, gyro-harmonic converters, gyropeniotrons, magnicons, free electron masers (FEMs), and dielectric vacuum windows for such high-power mm-wave sources. Gyrotron oscillators (gyromonotrons) are mainly used as high-power millimeter wave sources for electron cyclotron resonance heating (ECRH), electron cyclotron current drive (ECCD), stability control, and diagnostics of magnetically confined plasmas for clean generation of energy by controlled thermonuclear fusion. The maximum pulse length of commercially available 140 GHz, megawattclass gyrotrons employing synthetic diamond output windows is 30 min (CPI and European KIT-SPC-THALES collaboration). The world record parameters of the European tube are as follows: 0.92 MW output power at 30-min pulse duration, 97.5% Gaussian mode purity, and 44% efficiency, employing a single-stage depressed collector (SDC) for energy recovery. A maximum output power of 1.5 MWin 4.0-s pulses at 45% efficiency was generated with the QST-TOSHIBA (now CANON) 110-GHz gyrotron. The Japan 170-GHz ITER gyrotron achieved 1 MW, 800 s at 55% efficiency and holds the energy world record of 2.88 GJ (0.8 MW, 60 min) and the efficiency record of 57% for tubes with an output power of more than 0.5 MW. The Russian 170-GHz ITER gyrotron obtained 0.99 (1.2) MW with a pulse duration of 1000 (100) s and 53% efficiency. The prototype tube of the European 2-MW, 170-GHz coaxial-cavity gyrotron achieved in short pulses the record power of 2.2 MW at 48% efficiency and 96% Gaussian mode purity. Gyrotrons with pulsed magnet for various short-pulse applications deliver Pout = 210 kW with ? = 20 ?s at frequencies up to 670 GHz (? ? 20%), Pout = 5.3 kW at 1 THz (? = 6.1%), and Pout = 0.5 kW at 1.3 THz (? = 0.6%). Gyrotron oscillators have also been successfully used in materials processing. Such technological applications require tubes with the following parameters: f > 24 GHz, Pout = 4–50 kW, CW, ? > 30%. The CW powers produced by gyroklystrons and FEMs are 10 kW (94 GHz) and 36W(15 GHz), respectively. The IR FEL at the Thomas Jefferson National Accelerator Facility in the USA obtained a record average power of 14.2 kW at a wavelength of 1.6 ?m. The THz FEL (NOVEL) at the Budker Institute of Nuclear Physics in Russia achieved a maximum average power of 0.5 kW at wavelengths 50– 240 ?m (6.00–1.25 THz).
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Times; color: #131413} span.s1 {font: 10.0px Helvetica} span.s2 {font: 7.0px Times}

Go to The DNP-NMR Blog for more info.