Cryogenics free production of hyperpolarized (129)Xe and (83)Kr for biomedical MRI applications
 

From The DNP-NMR Blog:

Cryogenics free production of hyperpolarized (129)Xe and (83)Kr for biomedical MRI applications



Hughes-Riley, T., et al., Cryogenics free production of hyperpolarized (129)Xe and (83)Kr for biomedical MRI applications. J Magn Reson, 2013. 237(0): p. 23-33.


http://www.ncbi.nlm.nih.gov/pubmed/24135800


As an alternative to cryogenic gas handling, hyperpolarized (hp) gas mixtures were extracted directly from the spin exchange optical pumping (SEOP) process through expansion followed by compression to ambient pressure for biomedical MRI applications. The omission of cryogenic gas separation generally requires the usage of high xenon or krypton concentrations at low SEOP gas pressures to generate hp (129)Xe or hp (83)Kr with sufficient MR signal intensity for imaging applications. Two different extraction schemes for the hp gasses were explored with focus on the preservation of the nuclear spin polarization. It was found that an extraction scheme based on an inflatable, pressure controlled balloon is sufficient for hp (129)Xe handling, while (83)Kr can efficiently be extracted through a single cycle piston pump. The extraction methods were tested for ex vivo MRI applications with excised rat lungs. Precise mixing of the hp gases with oxygen, which may be of interest for potential in vivo applications, was accomplished during the extraction process using a piston pump. The (83)Kr bulk gas phase T1 relaxation in the mixtures containing more than approximately 1% O2 was found to be slower than that of (129)Xe in corresponding mixtures. The experimental setup also facilitated (129)Xe T1 relaxation measurements as a function of O2 concentration within excised lungs.


Go to The DNP-NMR Blog for more info.